Sharp Notevision PG-M25X Operation Manual page 89

3
Hold down
GyroRemote to move the en-
larged image.
• If the Screen moving indicator has dis-
appeared, press
Screen moving indicator, and then
move the image.
Info
• If OSD display in the "Options (1)"
menu is set to "Level A" or "Level
B", make sure to set it to "Normal".
If "Level A" or "Level B" is set, the
Screen moving indicator will not be
displayed, and the "Screen Pan"
cannot be performed.
Note
• You can also move the position of the
enlarged image using
or
4
Press to cancel the opera-
tion, then the magnification
returns to ×1.
Note
• In the following cases, the enlarged
image will return to its original size
(×1).
• When switching the input.
• When
(undo) has been
pressed.
• When the input signal has been
changed.
• When the image is replaced during
Autorun.
and move the
to display the
or
on the projector.
-85