Connecting To Video Equipment - Sharp Notevision PG-MB60X Operation Manual

Connecting to Video Equipment

The projector has a COMPUTER-RGB/COMPONENT terminal, an S-VIDEO terminal and VIDEO terminal for
video input. Refer to the listed illustrations on how to connect audio-visual equipment.
The image quality is highest in order of the component signal, the RGB signal, the S-video signal and the
video signal. If your audio-visual equipment has a component output terminal or RGB output terminal, use the
COMPUTER-RGB/COMPONENT terminal (INPUT 1 or INPUT 2) on the projector for video connection.
When connecting video equipment with component video output terminal
(When connecting to INPUT 1)
To audio output terminal
To component video output terminal
ø3.5 mm minijack to RCA
audio cable (commercially
available)
Note
• ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.
• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-
mercially available cable that fits in the projector terminal you want to connect.
To INPUT 1 terminal
Video Equipment
3 RCA (Component) to
15-pin D-sub cable
(optional: AN-C3CP)
To AUDIO
INPUT 1, 2 terminal
-25