Wiring Diagrams - Regency Sunrise E33S-NG1 Owners & Installation Manual

This heater does not require a 120V A.C. supply
for operation. However, a 120V A.C. power
supply is needed for the fan/blower operation.
Caution: Ensure that the wires do not touch any
hot surfaces and are away from sharp edges.
NATURAL GAS
For
®
Regency E33S-1 Sunrise Gas Insert

WIRING DIAGRAMS

NOT
Units and Units
CAUTION: Label all wires prior
to disconnection when servicing
controls. Wiring errors can cause
improper and dangerous operation.
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged
(grounding) plug for your protection against shock
hazard and should be plugged directly into a properly
grounded three-prong receptacle. Do not cut or remove
the grounding prong from this plug.
Equipped with DC Spark Boxes
INSTALLATION
17