Regency Sunrise E33S-NG1 Owners & Installation Manual page 32

MAINTENANCE
8) Remove the base cover by lifting up from the back and maneover out.
9) Disconnect the ON/OFF connector wires from the valve.
NOTE: For LP units disconnect the DC Sparker ignitor wire from the
valve.
ON/OFF Wires
32
10) Remove the valve tray by undoing the 17 screws.
Base Cover
11) Slighty lift out valve tray.
12) Disconnect the inlet gas line.
13) Replace valve and reverse steps.
MAINTENANCE
®
Regency E33S-1 Sunrise Gas Insert