Standard Flush Door - Regency P36-NG4 Owners & Installation Manual

INSTALLATION
The standard fl ush door comes with a black frame. To install the frame,
simply hook the top door fl ange onto the top of the unit and swing the
door towards the unit, see Diagram 1.
42

STANDARD FLUSH DOOR

Diagram 1
Be careful that the glass gasket does not roll up; there must be a gap
between the gasket and the door lip to ensure that the door sits securely
on the unit, see Diagram 2.
Diagram 2
Use the hook to pull the spring out until you can put the hook into the slot
on the bottom door bracket. Repeat for 2nd spring. See Diagram 3.
Diagram 3
To remove the fl ush door, reverse the above steps.
FPI P36-4 Zero Clearance Direct Vent Gas Fireplace