Wiring Diagrams - Regency P36-NG4 Owners & Installation Manual

INSTALLATION
This heater does not require a 120V A.C. sup-
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However,
a 120V A.C. power supply is needed for the
fan/blower operation.
NATURAL GAS
For
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
44

WIRING DIAGRAMS

(Do not cut the ground terminal off under
any circumstances.)
NOT
Units and Units
CAUTION: Label all wires
prior to disconnection
when servicing controls.
Wiring errors can cause
improper and dangerous
operation.
NOTE: Even if the fan is not purchased
with the unit, it is still a good idea to
bring power to the receptacle box
(provided with the unit) in case the
fan is installed at a later date.
Equipped with DC Spark Boxes
FPI P36-4 Zero Clearance Direct Vent Gas Fireplace