Oven Light Replacement; Oven Shelves; Self-Cleaning - GE P2B918 Owner's Manual & Installation Instructions

Care and cleaning of the range.
Oven Shelves and Drawer Racks
Clean the shelveswith an abrasive cleanser.
The oven shelves mug be cleaned in the
self-cleaning oven. However, the shelves
will darken in color, lose their luster and
become hard to slide if cleaned during
the self-cleaning cgcle.
To make the shelvesslide more easilg,applg
a small amount of vegetable oil or cooking oil
to a paper towel and wipe the edges of the
oven shelveswith the paper towel.
Wire cover holder.
Oven Light Replacement
CAUTION: Before
replacing
gour
oven light bulb, disconnect the electrical
power to the range at the main fuse or
circuit breaker panel. Be sure to let the
light cover and bulb cool completely.
The oven light bulb is covered with a
removable glass cover that is held in place
with a bail-shaped wire. Removethe oven
door, if desired, to reach cover easily.
To remove:
[] Hold a hand under the cover so it
doesn't fall when released.With fingers
of the same hand, firmlg push back the
wire cover holden Lift off the cover.
Do not remove any screws to remove
the cover.
[] Do not touch hot bulb with a wet cloth.
Replacebulb with a 40-watt household
appliance bulb.
To replace cover:
[] Place it into the groove of the light
receptacle. Pull the wire forward to
the center of the cover until it snaps into
place. When in place, the wire holds the
cover firmlg. Be certain the wire is in the
depression in the center of the coven
[] Connect electrical powerto the range.
38