Probe - GE P2B918 Owner's Manual & Installation Instructions

Self-cleaning dual fuel convection
Table of Contents

Advertisement

Using the probe, con some mode s;
If £our model has a door latch, do not lock the oven door with the latch while cooking with the probe. The latch is used
for self-cleaning only.
For many foods, especially roasts and poultry, internal food temperature is the best test for doneness. The
temperature probe takes the guesswork out of cooking foods to the exact doneness you want.
Useof probes other than the one provided
with this product mag result in damage to
the probe.
Usethe handles of the probe and plug when
inserting and removing them from the food
and outlet.
_
Cable
The temperature probe has a
skewer-like probe at one end and
a plug at the other end that goes
into the outlet in the oven.
i_,To avoid damaging your probe, do not use
tongs to pull on the cable when removing it.
!i_: T oavoid breaking the probe,make sure food
is completely defrostedbefore inserting.
5_: T opreventpossiblebums,do not unplug the
probe from theoutlet untilthe ovenhascooled.
ij_:, Never leave your probe insidethe oven
during a self-cleaningchicle.
!i_: D o not store the probe in the oven.
After preparing the meat and placing it on
a trivet or on a broiler pan grid, follow these
directions for proper probe placement.
Insertthe probe completelg into the meat.
It should not touch the bone, fat or gristle.
For roasts with no bone, insert the probe into
the meatiest part of the roast. For bone-in
ham or lamb, insert the probe into the center
of the lowest large muscle.
Insert the probe into the center of dishes such
as meat loaf or casseroles.
Insert the probe into the meatiest part of the
inner thigh from below and parallel to the leg
of a whole turkeg.
PROBE
F-q[]r-qFqE]
Drsm LLD
I-qE]IZ]E]71
Drs
START
J
18
CLEAR
OFF
How to Set the Upper Oven For Cooking When Using the Probe
[]
Insert the probe into the food.
[]
Plug the probe into the outlet in the
oven. Make sure it's pushed all the
wag in. Close the oven dooE
[]
Touch the Probe pad.
[]
Touch the number pads to set
the desired internal food or meat
temperature
between lO0°F and 200°R
[]
Touch the Bake pad.
[]
Touch the number pads to set the
desired oven temperature.
[]
Touch the Start- pad.
The displabl will flash if the probe is inserted
into the outlet and you hove not set a probe
temperature and touched the Start pad.
[]
When the internal temperature of the
food reaches the number gou have set,
the probe and the oven turn off and the
oven control signals.To stop the signal,
touch the Clear/Offpad. Use hot pads to
remove the probe from the food. Do not
use tongs to pull on it-theg might
damage it.
To change the oven temperature during
probe cooking, touch the Bakepad and then
the number pads to set the new temperature.
_ If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the
probe is removed from the oven.
!i_: Y ou can use the timer even though blou
cannot use timed oven operations while
using the probe.
The displag will show LO until the internal
temperature of the food reaches lO0°F;then
the changing internal temperature will be
shown.

Advertisement

Table of Contents
loading

Table of Contents