Configuring The Ethernet Card For Tcp/Ip - Epson Stylus Color 800N Setup Manual

Setup Guide
6. Follow the instructions on the screen, inserting the
requested diskette or CD-ROM if necessary.
When setup is complete, the Network Services tab or
Network Settings dialog box reappears.
7. In Windows NT 4.x, make sure
appears in the Network Services list, select it, and
Printing
click
Properties
box appears.
In Windows NT 3.5x, make sure
appears in the Installed Network Software list
Printing
box, then click
OK
8. Set the IP address and the subnet mask of the Windows
NT server or workstation. If you want to use the gateway
(router), set the IP address of the nearest gateway as the
default gateway.
9. In Windows NT 4.x, click
In Windows NT 3.5x, click
Network Settings dialog box appears.
For more information, see your Windows NT documentation.
Then follow the instructions below to configure the Ethernet
card in your printer.

Configuring the Ethernet Card for TCP/IP

If you're using Windows NT, follow these steps to configure
your printer with EPSON Net!:
1. Double-click the
Net! for Windows.
2. Select the correct serial number for the Ethernet card in
your printer (check the printed status sheet to verify this
number) and click
and shows the current IP address.
18
Microsoft TCP/IP
. The Microsoft TCP/IP Properties dialog
Microsoft TCP/IP
. The TCP/IP Components box appears.
to restart the computer.
Yes
Restart Now
EPSON Net! (NT)
. The IP Config dialog box opens
Open
when the
icon to start EPSON