Epson Stylus Color 800N Setup Manual page 9

Setup Guide
Caution:
Never turn off the printer
when the P power light
is flashing. However if
the P power light is still
flashing after 10
minutes and the printer
is not moving or making
noise, you may turn off
the printer.
6. Push down the clamp until it locks in place.
7. Press the X color cleaning button. The print heads move to
the left again so you can install the color ink cartidge.
black
cleaning
button
color
cleaning
button
8. Follow steps 3 through 6 to install the color ink cartridge.
9. Press the E load eject button.
The printer moves the print heads and begins charging the ink
delivery system. The P power light flashes, and the printer
makes various sounds. Charging takes up to 7 minutes. Don't
turn off the printer or interrupt this important process or
you'll use up more ink than necessary. When it's finished, you
can close the printer cover.
6
load/eject
button