Accessories Ink Cartridges Use these EPSON ink cartridges before the expiration date on the package. Cartridge Part number Black ink cartridge S020108 Color ink cartridge S020089 Media...
Page 2
The printer always uses the fonts you select with your software application. You need to use the printer’s internal fonts only if your application doesn’t allow you to select fonts.
Page 3
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
BL: The minimum left margin is 0.12 inch (3.0 mm). BR: The minimum right margin is 0.54 inch (14.0 mm). The minimum bottom margin is 0.12 inch (3.0 mm). 4 - EPSON Stylus COLOR 850N Mechanical Paper feed method Friction, auto sheet feeder, rear entry...
Reliability MTFB DOS Support If driver support for the EPSON Stylus COLOR 850N is not available from your software manufacturer, you can use one of the other EPSON ESC/P 2 printer drivers. These drivers don’t provide all the EPSON Stylus COLOR 850N features, such as 720 or 1440 dpi printing.
Fast, Normal Changing control panel settings Follow these steps to change the settings listed above: 1. Make sure the printer is turned off and has paper loaded. 2. Hold down the color cleaning button and press the power button. The printer prints a summary of instructions for changing settings and choosing a language for the instructions.
Ethernet card including the serial number, node address, and network information. You need the status sheet information to configure your card. Follow these steps: 1. Make sure the printer is turned on and has paper in the feeder. status sheet button 2.
When the light stays on, the cartridge is empty and you need to replace it. Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package:...
4 within 60 seconds.) Caution: To avoid damaging the printer, never move the print heads by hand. 4. Pull up the ink cartridge clamp. The cartridge rises up from its holder. (Although the illustration shows the black ink cartridge, the procedure is the same for replacing the color ink cartridge.)
Using the Head Cleaning Utility Follow these steps to run the utility from a Windows computer or a Macintosh: 1. Make sure the printer is turned on but not printing, and the black and color ink out lights are off.
Load paper that’s at least 8.27 inches (210 mm) wide. This prevents ink from spraying inside the printer and smudging your printouts. For the best results, load EPSON ink jet paper to check your alignment. 2. Access the printer settings dialog box.
If you need to transport your printer some distance, you should repack it in its original box. Follow these steps: 1. Turn on the printer and wait until the print heads lock in the far right position. Then turn off the printer.