Changing Your Port Setting - Epson Stylus Color 800N Setup Manual

3. If you inserted the CD-ROM and Windows starts the
installation program automatically, go to step 4.
If it doesn't start automatically (or if you're using Windows
NT 3.5x), click
(substitute the correct drive letter if necessary). Then click
. Go to step 4.
OK
If you're installing from diskettes, click
and type
A:\Setup
necessary). Then click
4. At the EPSON Setup CD window, make sure
is selected and click
Installation
5. Select
EPSON Stylus COLOR 800
tab and click
OK
6. Follow the instructions on the screen to install the software.
After you install the printer driver, you need to set up your port,
following the instructions below.

Changing Your Port Setting

The installation program for your printer driver automatically
sets your printer on LPT1. In Windows NT 4.x, make sure the
TCP/IP Print server service is running before you start. Then
follow these steps change to the correct port under Windows 95
or Windows NT 4.x:
1. Click ,
Start Settings
2. Highlight the EPSON Stylus COLOR 800 printer and
right-click the icon.
3. Select
Properties
4. In Windows 95, click the
In Windows 4.x, click the
27
, select , and type
Start Run
(substitute the correct drive letter if
and go to step 5.
OK
Next
in the Printer Model
.
, .
Printers
.
tab.
Details
tab.
Ports
Setup Guide
D:\Setup
, select ,
Start Run
Complete
.