3. Click
to configure the printer. The NetWare Config
Edit
dialog box appears:
4. Choose the operating mode you want to use:
Print Server
Remote Printer
Auto PrintServer/Remote
5. Follow the instructions for the operating mode you chose:
If you selected
number and enable or disable hunting if you want.
Then click
Save
process.
If you selected
print server in the Print Server name box. Then
continue with step 6.
If you selected
name that appears in the Print Server name box or type
a new name. Then continue with step 6.
13
, change the port
Remote Printer
to complete the configuration
, enter the name of the NetWare
Auto
, keep the default printer
Print Server
Setup Guide