Installing The Printer Driver; Installing On A Pc - Epson Stylus Color 800N Setup Manual

Setup Guide
Note:
If you don't have a
CD-ROM drive, you can
create diskettes from the
CD-ROM using another
computer. Under
Windows, run the Make
Diskettes program on
the CD. To make
Macintosh diskettes,
follow the instructions on
page 29.
10. Check the current settings and click
instructions on the screen. Select
restart Windows when you see the prompt.
You now need to install the printer driver and set up your
printer in Windows.

Installing the Printer Driver

Your driver software is on the EPSON printer software
CD-ROM that came with your printer. You need to install the
driver on each computer that will send print jobs to the
EPSON Stylus COLOR 800N.
The CD-ROM also contains EPSON Answers (Windows
only), a comprehensive online guide to using your printer.
EPSON Answers was not designed to run over a network or on
the Windows NT operating system. If you use it, be aware that
some of its features may not work and may cause problems on
your system.
If you're using Windows, Avery LabelPro 3.0 software is also
automatically installed on your system. For instructions on
using the program, see the online manual. If you require further
assistance with the program, contact Avery at (972) 389-3699.

Installing on a PC

1. Make sure the printer is on and Windows is running. Exit
any application programs.
If you're using Windows 95 and you see the New
Hardware Found screen, click
opportunity.
2. Insert the EPSON printer software CD-ROM or
diskette 1.
26
. Follow the
Next
and click
Yes Finish
at the first
Cancel
to