Epson Stylus Color 800N Setup Manual page 14

If you use NetWare 4.x, menus will differ slightly from the
menus described in the following procedure, and you must
select Bindery Emulation.
Follow these steps:
1. At the DOS prompt, type
2. From the Available Options menu, select
Information.
3. Select the name of a print server from the Print Servers list
and press .
Enter
4. From the Print Server Information list, select
Configuration.
5. Select
Printer Configuration
6. Select a port number in the Configured Printers list.
7. Select the name of your printer on the Printer
Configuration menu. Then highlight the Printer Type and
select
LPT1.
8. Press then press
Esc;
9. Select
Queues Serviced by Printer
Configuration menu and assign a queue to the print server
port from the Available Queues list. Then press
11
.
PCONSOLE
Print Server
.
to save changes.
Enter
from the Print Server
Setup Guide
Print Server
to exit.
Esc