Using the Ethernet Card
Note:
To verify that the DLC
protocol is installed
correctly, check the list
of installed Network
Software in the
Network dialog box.
Installing the DLC Protocol
Make sure Windows NT is running, and follow these steps to
install DLC:
1. Open the Control Panel.
2. Double-click the
Network
3. Click the
Protocols
4. Select
DLC Protocol
and click
.
OK
5. Follow the instructions on the screen and reboot your
system.
Configuring the Ethernet Card
After you have installed the DLC protocol, follow these steps to
configure the card and your printer for Window NT 4.0:
1. Double-click
My Computer
icon.
Printers
2. Double-click the
Add Printer
3. Select
My Computer
4. Click
.
Add Port
5. Select whatever DLC network port setting you have on
your system, then click
If necessary, insert your Windows NT CD-ROM or
diskette so Windows can copy the files.
6. Type a name for the port in the
name is not the same as an existing port, such as LPT1.
6-6
icon.
tab and then click
.
Add
from the Select Network Protocol list,
, then double-click the
icon.
, then click
Next.
New Port.
box. Make sure the
Name