Wsd Print - Kyocera TASKalfa 3500i Operation Manual
3500i/4500i/5500i operation guide rev-1 2011.4
Hide thumbs
Also See for TASKalfa 3500i:
- User manual (30 pages) ,
- Quick manual (16 pages) ,
- Safety manual (2 pages)
Table of Contents
Advertisement
WSD Scan
Select whether or not to use WSD Scan. The default setting is On.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-101.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of WSD Scan.
3
Press [On] or [Off].
4
Press [OK].
WSD Print
Select whether or not to use WSD Print. The default setting is On.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-101.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of WSD Print.
3
Press [On] or [Off].
4
Press [OK].
Enhanced WSD
Set whether to use our proprietary web services. The WIA driver, TWAIN driver, and Network driver use this
Enhanced WSD Web service. The default setting is On.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-101.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of Enhanced WSD.
3
Press [On] or [Off].
4
Press [OK].
9-96
Default Setting (System Menu)
Hide quick links:
Advertisement
Chapters
Table of Contents
