Procedure For Changing The Default Settings; Message Language - Kyocera TASKalfa 180 Operation Manual

Procedure for Changing the Default Settings

The procedure for changing each of the items in the System Menu is described below.
User Status Report
Outputs a list of the values set for the System Menu items.
NOTE:
Check to make sure that Letter/A4 size paper is loaded in the cassette.
System Menu:
01.Copy Status

Message Language

You can select the language of the message display by following the procedure described below.
System Menu:
02.Language
Original Image Quality
Sets the original image quality that will be selected at the time the copier is turned on.
System Menu:
03.Image Quality
OPERATION GUIDE
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press or to select 01.Copy Status and
then press the OK key.
3
Press to select Yes and then press the
or
OK key.
The report will print.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press or to select 02.Language, and then
press the OK key.
3
Press to select the language and then
or
press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 03.
or
Quality , and then press the OK key.
System Menu
5
Image
5-9