Selecting Image Quality - Kyocera TASKalfa 180 Operation Manual

Copying Functions

Selecting Image Quality

The Image Quality can be selected to match the type of original to be copied. Press the Image Quality
Selection key to light up the Image Quality Mode to be used.
The table below shows the quality options.
Image quality mode
NOTE:
The Image Quality Mode selected in the System Menu can be changed. (Refer to Original Image
Quality on page 5-9.)
The density of each of the Image Quality Modes can be adjusted. (Refer to Text + Photo Mode Density
Adjustment on page 5-11, Photo Density Adjustment on page 5-11 and Text Density Adjustment on page 5-12.)
When horizontal lines stand out in Photo Mode, select Dithering (Refer to Photo Processing on page 5-12).
Note, however, that the images will be rougher when Dithering is used.
4-4
Text + Photo
Text
Photo
Description
For originals with both text and photographs.
For originals primarily consisting of text.
For photos taken with a camera.
OPERATION GUIDE