In 1 Layout - Kyocera TASKalfa 180 Operation Manual

Copying Functions
Portrait 1
1
3
Landscape 1
1
3
Setting the Combine mode Border Lines
Use the procedures described below to change the Combine mode Border Lines.
4-16

45.4 in 1 Layout

Portrait 1
Portrait 2
1 3
2
4 2 4
Landscape 2
2 1 3
4 2 4
System menu:
46.Combine Border
1
Press the Combine key for 3 seconds.
The System Menu will be displayed.
2
Confirm that 45.4 in 1 Layout is displayed and
then press the OK key.
3
Press to select the layout.
or
The order in which pages are to be laid out is
shown in the figure.
4
Press the OK key.
The display will blink and copying starts.
1
Press the Combine key for 3 seconds.
The System Menu will be displayed.
2
Press to select 46.Combine Border,
or
and then press the OK key.
3
Press to select the type of border line,
or
and then press the OK key.
The display will blink and the copier will return to
the state where copying can be continued.
OPERATION GUIDE