Kyocera TASKalfa 180 Operation Manual page 135

Optional Document Processor (J70 to J75 and J78)
When the paper misfeed has occurred in the optional Document Processor, use the procedure below to clear it
A
OPERATION GUIDE
1
Remove all of the originals remaining in the original
table.
2
Open the left cover.
3
Remove the jammed original without tearing it.
NOTE:
If the original does happen to tear, remove any
loose scraps from inside the document processor.
Failure to do so may cause another paper jam later.
4
Raise the paper feed unit A.
5
Remove the jammed originals without tearing
them.
NOTE:
If the original does happen to tear, remove any
loose scraps from inside the document processor.
Troubleshooting
8
8-13