Copying Functions
Basic Copying Procedure
Follow the steps as below for basic copying.
4-2
1
Place the originals on the platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-13.
2
Select the desired copier's functions to use.
3
Select the copy paper. If Auto is lit on the message
display, copy paper of the same size as the original
is automatically selected.
To change the paper size, press the Paper Select
key to select the desired paper source.
NOTE:
Select paper size manually, if necessary,
instead of using automatic paper selection.
It is possible to disable this auto paper selection
function. For details, refer to Cassette Selection on
page 5-13.
It is also possible to specify a cassette that will be
selected automatically even without setting any
originals. For details, refer to Selected Cassette on
page 5-14.
4
Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
5
Press the Start key to start copying.
6
Remove the finished copies from the top tray.
OPERATION GUIDE