Preparation before Use
Loading Paper in the Cassettes
Standard paper, recycled paper, and colored paper can be loaded into the cassette. Up to 300 sheets of
standard paper (80 g/m
The following paper sizes are supported: Ledger, Legal, Oficio II, Letter, Statement, A3, B4, A4, A4-R, B5, B5-
R, A5-R, Folio, 8K and 16K.
IMPORTANT:
•
You should not use inkjet printer paper or any paper with a special surface coating. (Such papers may
cause paper jams or other faults.)
•
Do not load thick paper that is heavier than 105 g/m
that is heavier than 105 g/m
2-4
2
) or 100 sheets of thick paper (90 to 105 g/m
2
.
2
) can be set.
2
in the cassettes. Use the multi purpose tray for paper
1
Pull the cassette out toward you until it stops.
NOTE:
Do not pull out more than one cassette at a
time.
2
Push down on the cassette base plate and secure
it.
3
Holding the paper width adjusting tab, move the
paper width guides to fit the paper.
IMPORTANT: Make sure that the width guides are flush
against the paper. If there is space between the guides
and the paper, set the width guides again.
NOTE:
The paper sizes are impressed in the cassette.
OPERATION GUIDE