Auto Detect Originals - Kyocera TASKalfa 180 Operation Manual

System Menu

Auto Detect Originals

Allows you to predetermine what paper size is selected for printing when copying an original document of non-
standard sizes (Refer to below). This feature is applicable when the size of the original is either Hagaki, A6R,
B4R or Folio. The menu also provides the means to determine whether 11 x 15" is recognized as a standard
size.
The setting of Hagaki or A6R is shown here as an example, select 39.B4R/Folio Det and 40.11x15" Detect in
the System Menu before selecting B4R and 11 x 15", respectively.
NOTE:
This setting is only available for metric models.
5-18
System Menu:
38.Hagaki/A6RDet
3
Press to select the desired media type,
or
and then press the OK key.
When the optional Duplex Unit is not installed, the
display will return to that of Step 2.
4
Press to select On when 2-sided Copying
or
is to be used or Off when it is not used., and then
press the OK key.
The display will return to that of Step 2
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 38.Hagaki/
or
A6RDet, and then press the OK key.
3
Press to select the paper size to set up.
or
When the size of the original document is Hagaki or
A6R, choose Hagaki to copy it on Hagaki size or A6
R to copy it on A6R size.
When the size of the original document is B4R or
Folio, choose B4 R to copy it on B4R size or Folio
R to copy it on Folio size.
When the size of the original document is 11 x 15"
(computer form), you can choose whether the
original document is automatically zoomed to the
currently selected paper (On) or the copier halts
and prompts you to investigate the size of the
original document (Off).
4
Press the OK key.
The display will return to that of Step 2.
OPERATION GUIDE