Erasing Macropower & Other Macro Commands - Universal Remote Control URC-SR3 Owner's Manual

Erasing MacroPower & Other Macro
Commands
STEP 1: To erase MacroPower commands on the
POWER or ALL OFF button, press and hold either
the POWER or ALL OFF button and the
SELECT[SEL] button simultaneously for two seconds
until the current status component LED turns on.
IMPORTANT: If you don't proceed to the next
step within 30 seconds, the LED will turn off and
exit set-up mode and you will need to start over.
STEP 2: Press the CHANNEL UP button to erase
and exit Erase mode. The component LED light will
blink two times to confirm the erasure.
ALL OFF
POWER ON
SELECT
CH
NOTE: To erase other Macros, simply press the
appropriate button in Step 1 in combination with
the SELECT[SEL] button.
Page 26