Factory Reset - Universal Remote Control URC-SR3 Owner's Manual

Factory Reset

You can reset your URC-SR3 remote to the original
factory default settings.
Press and hold both the CBL/SAT and RECORD
buttons for about five seconds until the DVD
component LED light blinks five times. All
programming and set-up codes that you have
entered into the remote will be erased and the
URC-SR3 will return to the original factory default
settings.
Warning
This procedure will erase all programming
and set-up codes that you have entered into
the remote.
CBL/SAT
RECORD
Page 28
DVD