Erasing Macropower & Other Macro Commands - Universal Remote Control URC-A6 Owner's Manual

Erasing MacroPower & Other Macro
Commands
STEP 1: To erase MacroPower commands on the
POWER ON or SYSTEM OFF button, press and
hold either the POWER ON or SYSTEM OFF
button and the MUTE button simultaneously for two
seconds until the current status component LED turns
on.
IMPORTANT: If you don't proceed to the next
step within 30 seconds, the LED will turn off and
exit set-up mode and you will need to start over.
STEP 2: Press the CHANNEL UP button to erase
and exit Erase mode. The component LED light will
blink three times to confirm the erasure.
SYSTEM
POWER
OFF
ON
MUTE
CHANNEL
UP
NOTE: To erase other Macros, simply press the
appropriate button in Step 1 in combination with
the MUTE button.
Page 27