Table of Contents
Advertisement
MacroPower™
Imagine turning on your TV, your DVD player and your surround
sound receiver by pressing a single button on your R7! What would
normally take three remotes and three button pushes, the R7 can
accomplish with the press of one button. We call that MacroPower.
Any of the POWER
ON
or the SYSTEM
OFF
buttons can
be
programmed
for MacroPower
control. To set up MacroPower
to
these buttons, follow these easy steps:
STEP 1: To program MacroPower commands for the ON button,
press the ON button and the MUTE button together and hold them
down for about 3 seconds until one of the component button LED
lights turns on.
ON
Button
MUTE
Button
IMPORTANT: If you don't press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and you will need
to start over.
STEP 2: Press the component button you want to turn on and then the
ON button and repeat for all other components in the order you want
them to turn on. The LED light will blink once for each command.
21
Advertisement
Table of Contents
