Sony Handycam HDR-FX1000 Operating Manual page 89

1
Set the POWER switch to VCR.
2
Set the input signal of your
camcorder.
Set [VCR HDV/DV] to [AUTO] wben
recording from all HDV format
compatible device,
Set [VCR HDV/DV] to [DV] o1"
[AUTO] when recording from a DV
format compatible device (p. 77).
3
Connect your VCR as a player to
your camcorder.
When all i.LINK cable is connected, the
format of the input signal (HDVIN
or DVIN _) will be
indicated on the LCD screen of your
camcorder (This indicator may appear
on the screen of the playback device but
it will not be recorded).
6
Start playing the cassette on your
VCR.
The picture played on the VCR appears
on the LCD screen of your camcorder.
7
Press II (PAUSE) again at the
point you want to start recording.
8 Press • (STOP) to stop
recording.
==-
4
Insert a cassette into the VCR.
Set your camcorder to recording
pause.
While pressing I| (PAUSE), press both
• REC (record) buttons
simultaneously.
(J Notes
• You cannot record TV programs h'om the
HDV/DV inlerface (i.LINK).
• You can recoM pictures h'om DV devices only
in the DV lormal.
• Nole the Following when c(mnecting with an
i.LINK cable:
The recorded picture becomes
rough
when a
picture is paused on yore" camcorder while
recording to a VCR.
You cannot record the piclure and sound
separalely.
If you pause or stop Ihe recording and reslarl
it, the piclure may nol be recorded smoothly.
"_" Tips
• When a 4:3 video signal is input, it appears with
black bands on the right and lell sides on Ihe
SCl*eell Ol yotl/" calncorder.
Continued-* 8g