Sony Handycam HDR-FX1000 Operating Manual page 79

You call select [480i1 or [1080i/480i]
depending on your TV when you connect
your camcorder to a TV via a component
A/V cable.
480i
Supports connection between your
camcorder and a TV v,ith a component
input jack that supports the 480i format.
• 1080i/480i
Supports connection between your
camcorder and a TV v,ith a component
input jack that supports the 1080i format.
You can convert signals in HDV format to
DV format, and output pictures in DV
format fi'om the _ HDV/DV interface
(i.LINK).
_0FF
Outputs the pictures from the _, HDV/DV
interface (i.LINK) in accordance with the
settings in [REC FORMAT] and [VCR
HDV/DV].
0N
Pictures in HDV format are converted to
DV format, and pictures in DV format are
ouffmt in DV format.
0 Notes
• For input signal via an i.L1NK connection, see
[VCR HDV/DV] (p. 77).
• Disconnect the i.LINK cable betk>re setting
[i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize the
video signal fi'om your camcorder.
You need to convert the signal depending
on a type of your TV when playing back the
picture. The recorded pictures are played
back as following illustrations.
I,'16:9
Select to view your pictures on a 16:9
(wide) TV.
HDV/DV (16:9) DV (4:3) format
format pictures pictures
@11@1
4:3
Select to view your pictures on a 4:3
standard TV.
HDV/DV (16:9)
format pictures
0 Notes
DV (4:3) format
pictures
• This is not effective lor the i.LINK output.
• When you connect your camcorder to a TV
compatible with the ID-I system or via an
S VIDEO jack for playing back the tape, set
[TV TYPE] to [l 6:91. The TV automatically
switches the aspect ratio according to the
playback picture. Relbr also to the manual
supplied with your TV.
€.-
€._
g-
79