Sony Handycam HDR-FX1000 Operating Manual page 55

You call search scenes by recording dates.
1
Set the POWER switch to VCR.
2
Press the SEARCH M. button []
on the Remote Commander
repeatedly to select [DATE
SEARCH].
O Press the _ (previous)/l_l_l
(next) button [] on the Remote
Commander to select a recording
date.
You call select a date previous or next to
the date of the current tape position.
Playback automatically starts fi'om the
scene recorded on the selected date.
You call search scenes by indexes recorded
at the start of recording (p. 45).
4
/ Set the POWER switch to VCR.
2
Press the SEARCH M. button []
on the Remote Commander
repeatedly to select [INDEX
SEARCH].
3
Press the _ (previous)/l_l_l
(next) button [] on the Remote
Commander to select an index
point.
You call select all index previous or next
to the index of the current tape position.
Playback automatically starts fi'om the
scene marked by the index.
"o
m
To cancel t heoperation
tS"ess the STOP button [] on the Remote
Commander.
(J Notes
• Each &_y of recording must be longer thm_ 2
milmtes. Yore" camcorder may not detect the
date if the recording of that date is short.
• The date search may not work properly if a
blank section exists on the tape.
To cancel the operation
Press the STOP button [] on the Remote
Commander.
(J Notes
• Recording between indexes must be longer than
2 minutes. Yore" camcorder may not detect the
date if the recording between the indexes is
short.
• The index search may not work properly if a
blank section exists on the tape.
55