Sony Handycam HDR-FX1000 Operating Manual page 68

tS"ess the MENU button ---+ select the _(CAMERA SET) with the SEL/PUSH EXEC dial. ]
You can select the speed at which the
automatic exposure adjustment function
follows changes ill the brightness of the
subject. You can select the speed fl'om
]FAST], ]MIDDLE] and ]SLOW]. The
default setting is ]FAST].
You call select the highest iris value for the
automatic adjustment from [FI 1], [F9.6],
IF8], [F6.8], [F5.6], [F4.8] and IF4]. The
default setting is [FI 1].
0 Notes
* This lunclion is not effective during the manual
iris adjustmenl.
I,,ON
Reduces flickering. Flickering of"the
screen under a light source such as
fluorescent lamps will be reduced.
OFF
Not reduce flickering.
0 Notes
• Flickering may not be reduced fk_rcertain light
sources.
When you set this function to [ON], your
camcorder detects high contrast images,
such as backlit scenes, and automatically
improves the unexposed images. The
default setting is [ON].
0 Notes
• When you set [BACK LIGHT] lo [ONI,
[CNTRST ENHCR] is temporarily disabled.
When you set this function to [ON] (1_I),
you can correct backlighting. The default
setting is [OFF].
0 Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON1.
• [BACK LIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
• [BACK LIGHT] is set to [OFF] if at least two of
iris, gain. and shutter speed are adjusted
manually.
When you set this function to [ON] (_),
you can prevent overexposure of light
during recording of a subject under strong
light, such as a stage. For example, you can
prevent people's faces fl'om over-
highlighting. The default setting is [OFF].
0 Notes
• [SPOTLIGHT] is set to [OFF] when you set
[BACK LIGHT] to [ON1.
• [SPOTLIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
• [SPOTLIGHT] is set to [OFF] if at least two of
iris, gain. and shutter speed are adjusted
manually.
N ON/OFF
When you select [ON], you can reduce
camera shakes. Select [OFF] (_) when
you use a tripod (optional) to make images
look natural. The default setting is [ON].
N TYPE
You can select a type of camera-shake
reduction for different recording situations.
HARD
Reduces camera shakes :tt a high leveh
This setting is not suitable %r panorama
tilt recordings.
68