Sony Handycam HDR-FX1000 Operating Manual page 54

Locatinga scene on a tape
[]
O Notes
• See page 127 for details on how 1o use the
Remote Commander.
1
During playback, press the ZERO
SET MEM button [] on your
camcorder or the ZERO SET
MEMORY button [] on the Remote
Commander at the scene where
you want to create a cue point.
The tape counter is reset to "0:00:00"
and +0÷ appears on the screen.
+o÷
If the tape counter is not dis_yed,
press the DISPLAY button _ID21.
2
Press the STOP button [] when
you want to stop playback.
3
Press the _I_IREW button [_.
The tape stops automatically when the
tape counter reaches "0:00:00."
The tape counter returns to the time
code display, and +0÷ disappears.
4
Press the PLAY button [].
Playback starts from the point
designated "0:00:00" on the tape
counter.
Tocancel t heoperation
tS"ess the ZERO SET MEM button [] or
the ZERO SET MEMORY button [] again
before rewinding.
O Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not ftmction correctly if
there is a blank section between recorded
sections on the tape.
54