Sony Handycam HDR-FX1000 Operating Manual page 72

tS"ess the MENU button ---+ select the _(CAMERA SET) with the SEL/PUSH EXEC dial.
SOFT TRANS
Make the transition slo,aly at the
beginning and end, and linearly in
between.
"1 [ /_-e
l# ##
*2
0 Notes
• You cannot change ITRANS TIME] and
ITRANS CURVE] settings dm'ing store, check.
or execution of [SHOT TRANSITION]. Cancel
[SHOT TRANSITION] setting by pressing the
ASSIGN 4 button several times beti_re changing
[TRANS TIME] or [TRANS CURVE] setting.
When you set this function to tONI, you
can record with the wider color range. Your
camcorder can reproduce brilliant and vivid
colors for flowers and the beautiful blue-
green of tropical oceans that cannot be
matched by conventional technologies.
0 Notes
• The colors may not be well reproduced when
you play back a movie recorded with this
flmction set to [ON] on a TV that does not
support x.v.Color.
• Ynu cannot set [x.v.Color] in tile lollnwing
cases:
When recording in SD (standard) format
When recording movies
• When you set [x.v.Color] to [ON], tile picture
prnfile will be disabled.
N ON/OFF
When you select tONI, you can display
color bars on the screen or record them on a
tape. This function helps you to adjust
colors when you view movies recorded
with your camcorder on a TV or a monitor.
The default setting is [OFF].
0 Notes
• This fuIlction is
alltomatically set
to [OFF]
when you turn the power nff and back nn.
N TYPE
• Selects a type of the color bars.
TYPE1
TYPE2
TYPE3
TYPE4
(75% brightness of TYPE3)
72