Sony Handycam HDR-FX1000 Operating Manual page 82

Fh'ess the MENU button ---+ select the _ (OTHERS) with the SEL/PUSH EXEC dial. J
82
N Tochange the cameraprofilename
You call change the camera profile name.
(_) Select [PROFILE NAME] with the
SEL/PUSH EXEC dial.
@ Select the camera profile of which you
want to change the name with the SEE/
PUSH EXEC dial.
[PROFILE NAME] screen appears.
@ Change the profile name with the SEL/
PUSH EXEC dial.
"_" Tips
• You can enter the name in the same way
as the picture profile (p. 42).
(_) Select [OK] with the SEL/PUSH
EXEC dial.
Profile name is changed.
N To delete camera profile settings
(_) Select [DELETE] with the SEL/PUSH
EXEC dial.
@ Select the camera profile you want to
delete with the SEL/PUSH EXEC dial.
@ Select [YES] on the check screen.
See page 44.
You can select a function to assign to the
PHOTO/EXPANDED FOCUS button.
• PHOTO
Functions as the PHOTO button (p. 30).
EXP.FOCUS
Functions as the EXPANDED FOCUS
button (p. 33).
0 Notes
• If [EXP.FOCUS] is selected, you cmmot record
still images with the main unit button. Please
use the PHOTO button on the Remote
Commander.
See page 24.
When you use your camcorder abroad, you
can adjust the clock to the local time by
setting the time difference with the SEL/
PUSH EXEC dial.
When you set the time difference to 0, the
clock returns to the original setting.
You can select the language to be used on
the LCD screen.
-i_- Tips
• Your camcorder olfers [ENGIS1MP]]
(simplified English) ill case that you cannot lind
your native tongue among the options.
When you set this function to [ON], you
can enlarge movie images about 1.1 to 5
times (still images about 1.5 to 5 times)
with the handle zoom lever. The default
setting is [OFF]. To end the zoom, press
and hold the W side of the handle zoom
lever until it stops.
"_" Tips
• To move the zoom horizontally, press the SEL/
PUSH EXEC dial, then turn the dial. To move
the zoom vertically, press the SEL/PUSH EXEC
dial one more time, then turn the dial.
You can slightly reduce the recording start
point time when resuming recording by
changing the POWER switch from OFF
(CHG) to CAMERA.
•OFF
It takes some time to restart recording from
the state that the drum has stopped
rotating, but the transition from the last
recorded scene is smooth.