Sony Handycam HDR-FX1000 Operating Manual page 19

Aftercharging thebattery
Tile CHG lamp turns off when tile battery is
fully charged. Disconnect the AC Adaptor
fi'om the DC IN jack.
"_" Tips
• You can check tile remaining battery life with
tile battery intk_ Rmction (p. 53)
To remove thebattery pack
Set tile POWER switch to OFF (CHG).
Push the BATT RELEASE (battery release)
button and remove the battery pack.
BATT RELEASE
(battery release) button
Tostorethebattery pack
If tile battery pack will not be used for a
while, run down the battery and store it. See
page 113 for details on storage of the
battery pack.
Chargingtime
Approximate time (rain.) required when
you fully charge a fully discharged battery
pack.
NP-F570 (supplied) 260
NP-F770 370
NP-F970 485
Recording t ime
Approximate time (rain.) available when
you use a fully charged battery pack.
0 Notes
• You cannot use tile NP-F330 battery pack with
this camcorder.
Recording in the HDV format
NP-F570 135 65
(supplied) 140 70
NP-F770 290 145
295 145
NP-F970 430 215
445 220
Recording in the DV format
NP-F570 145 70
(supplied) 150 75
NP-F770 300 150
310 155
NP-F970 450 225
465 230
Top: When tile LCD backlight turns on.
Bottom: Recording time when recording with
tile viewfinder while the LCD panel is
closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
,X
Continued._
19