Table of Contents
Advertisement
WATTS - Shows your current watts expenditure at that specific time during your workout.
I
NOTE: Press the S
CROLL
2. Press the Lower Data Information Window S
an LED next to the parameter name):
DISTANCE - Shows the total number of miles or kilometers you have traveled thus far.
I
SPEED - Shows the speed at which you are currently striding, in miles-per-hour or kilometers-per-hour.
I
METS - Shows your current METS expenditure at that specific time during your workout.
I
PAUSE MODE
If you come to a complete stop during your workout, the TOTAL BODY TRAINER will enter a "pause" mode, the duration of which is set in
Maintenance Mode. To continue your workout, begin striding before the "pause" timer expires and your workout data will not be lost.
COOLDOWN CYCLE
In most programs, once you have completed your workout, the TOTAL BODY TRAINER enters a two-minute Cooldown cycle.
NOTE: The TOTAL BODY TRAINER software is programmed to properly decrease striding resistance to provide a cooldown.
1. You can adjust the difficulty LEVEL during Cooldown.
Use the
I
the difficulty LEVEL in 1 unit increments.
When the desired difficulty LEVEL has been entered by using the
I
LEVEL or press the
2. When the Cooldown cycle ends, your workout summary displays in the Information Window. If you wish to exit the Cooldown
cycle before it ends automatically, stop striding.
USING THE PERSONAL FAN
The
trol the fan speed during your workout.
Press the
key, as necessary, to cycle the personal fan from OFF to HIGH to LOW to OFF. An LED indicator lights to show the
I
currently selected fan speed.
The fan remains set at the set speed if you pause your program, unless your workout was less than two minutes in length.
I
The fan turns off automatically if you exit your workout, or when you complete your workout program.
I
The fan turns off automatically if you pause your program and the time elapsed is less than two minutes.
I
USING SELECTFIT™ (P-TBT
The
striding. The SelectFit™ feature can be used with any workout program.
NOTE: SelectFit™ is automatically enabled when the T
arm between the "PULLING" and "PUSHING" positions.
Press the
key to place the upper body arms in the "PULLING" position. Press the
I
"PUSHING" position.
Press the
key to place the upper body arms in the disengaged or "NONE" position.
I
The upper body arms remain in the set position if you pause your program.
I
The SelectFit™ feature returns to the "PULLING" position if you exit your workout, or when you complete your workout program.
I
16
key to toggle between data during your workout.
key to view the following workout data (the current data display is indicated by
CROLL
keys to enter a difficulty LEVEL (from 1 to 20); or press the
key.
is equipped with a built-in personal fan to increase your comfort during a workout. You can con-
is equipped with the SelectFit™ feature that provides a variable upper body workout while
OTAL
ONLY)
X
B
program is selected. The program varies the position of the upper body
ODY
STAR TRAC TOTAL BODY TRAINER O
or
key, as desired, to increase or decrease
keys, press the
key to accept the displayed
key to place the upper body arms in the
'
M
WNER
S
ANUAL
Advertisement
Table of Contents
