Page 1
Star Trac Instinct ™ Chest Press ’ W N E R A N U A L STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 http://www.startrac.com email: support @startrac.com September 2006...
Warranty and Disclaimer ............... . Copyright 2006. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
Page 3
STAR TRAC INSTINCT CHEST PRESS O ’ STAR TRAC INSTINCT CHEST PRESS O ’ WNER ANUAL WNER ANUAL...
Our mission is to provide prod- ucts to mold lifelong habits for health and fitness, and the INSTINCT CHEST PRESS will provide the path to meet your goals.
NSTRUCTIONS STAR TRAC warrants all frameworks for a period of 10 years. All moving parts are warranted for 1 year. 10 year limited warranty on structur- Read this Owner's Manual carefully before assembling, servicing or using your STAR TRAC INSTINCT CHEST PRESS.
Verify that all parts listed above are included in your shipment. Take time now to enter your INSTINCT CHEST PRESS serial number in the space below. If parts are missing, or if you have any operational questions, please call Star Trac’s Service department at (800) 503-1221; have your serial number ready.
(2). Rotate the leverage arm back until it rests against the stop on the main frame. STAR TRAC INSTINCT CHEST PRESS O ’ STAR TRAC INSTINCT CHEST PRESS O ’...
Weight, 15lb (56) - six required (available through the STAR TRAC Parts Department). Fill the damaged area sparingly, using two or more coats. Allow the area to dry thoroughly between coats. Once the touch-up is complete, it can be left “as is”, or it can be blended and color- Weight, 10lb (55) - seven required sanded to the surrounding surface.
(adjustment or parts replacement) should be performed. If any components are found to be worn or damaged, inch-pounds. the unit should be removed from service until repairs can be made. Only components supplied or approved by Star Trac shall be Route the weight belt (28) over five pulleys (9), as illustrated.
The INSTINCT CHEST PRESS must be anchored to the floor using through bolts or anchoring studs. Each foot pad on the unit provides two anchoring holes that will accommodate bolts of up to 12mm (7/16") diameter. Only one hole in each foot pad is required during anchoring.