Displaying Egc Closed Network Id (Enid) - Furuno FELCOM 12 Operator's Manual

Displaying EGC closed network ID (ENID)

TM
To join a FleetNET
information provider. The information provider adds the MES to the
group which is to receive the service by downloading a Group Call
ID, via a LES which supports FleetNET
dressed to the MES. The MES stores the ID and can accept broad-
casts from the information provider. The MES operator can not change
this stored EGC closed network IDs (ENIDs). Up to 64 ENIDs are
stored on a non-volatile memory.
The ENID stored can be accessed for downloading and deleting via
the satellite path. It is possible for an MES operator to inhibit (or
activate as required), via the DTE, selected ENIDs previously down-
loaded.
Along with the ENID, the name of the information provider is stored.
In the event that a download command is received and the ENID
storage area is full, then an ENID which has been inhibited (de-acti-
vated) by the MES operator will be written over. If none has been
inhibited, then the new download is not accepted.
Follow the procedure below to inhibit (or activate) an ENID.
1. Press [F4] to display EGC menu.
2. Press [2] to display the EGC Network ID List.
File Edit Transmit EGC
EGC
1. Display EGC Message
2. EGC Network ID
ENT: Activate SPACE: Inhibit Ctrl+P: Print ESC: Quit
Mark '*' means activation
01
* 00001 202
02 * 00002 202
03 * 04001 202
04 * 04002 202
05
* 04003 202
06 * 04005 202
07 * 04006 202
08 * 04007 202
Current State: IDLE
DCE Ver **
Figure 4-40 EGC network ID list
service, an MES must be registered with an
TM
Reports Logs Options
EGC Network ID List
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
SYNC ( NCS )
NCS: IOR LOGIN
broadcasts, uniquely ad-
Setup Position StopAlarm
97-02-28 12:00 (UTC)
LAT: 34:43.00N
LON: 135:21.00E
4-29