Displaying Waypoint Name; Operations On The Waypoint List - Furuno GP-32 Operator's Manual

3. WAYPOINTS (MARKS)
3.3 Displaying Waypoint
Name
You may display waypoint name as follows:
1. Press the [MENU] key once or twice to
display the menu.
2. Choose PLOTTER and then press the
[ENT] key.
3. Choose WPT NAME and then press the
[ENT] key to show the waypoint name
display options.
DSP GOTO
DSP RTE
DSP ALL
Waypoint name display options
4. Choose DSP GOTO, DSP RTE or DSP
ALL as appropriate and then press the
[ENT] key.
DSP GOTO: Displays only the GOTO
waypoint name.
DSP RTE: Displays all waypoint names
when a route is set as destination.
DSP ALL: Displays all waypoint names.
5. Press the [MENU] key twice to finish.
16
3.4 Operations on the
Waypoint List
Editing waypoints
Waypoint position, waypoint name, mark
shape and comment can be edited from the
WPTS/MARKS List.
1. Press the [MENU] key once or twice to
display the menu.
2. Choose WAYPOINTS and then press the
[ENT] key.
3. Choose LIST or NEAREST and then
press the [ENT] key.
4. Choose waypoint to edit and then press
the [ENT] key.
Note: CURSOR, MOB and START are
automatically updated according to
destination setting or MOB setting.
Therefore, editing these items has no
meaning.
5. Choose NAME and then press the [ENT]
key.
6. Change name with the cursor pad and
then press the [ENT] key. You are then
asked if you want to create or rename the
waypoint, or quit (escape) the display.
CREATE?
RENAME?
Quit?
Waypoint edit options
7. Choose objective desired and then press
the [ENT] key.
8. Change position, mark shape, comment
as desired.
9. Choose "Exit?" and then press the [ENT]
key.
10. Press the [MENU] key twice to finish.