Furuno FELCOM 12 Operator's Manual page 93

Transmit
0001|t 1. Transmit Message
2. Cancel
Priority
3. Request Delivery Status
Message File
Station Name
Destination Type
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
---- * ---------+---------+---------+---------+---------+---------+---------<
Subject
25 Char.
Attach File
LES ID
Option
[ TRANSMIT ]
Figure 4-9 Transmit message menu, select file window opened
(11) Press [Enter] to open the file list window.
To change drive on a PC, move the cursor to the command
line, type drive name (for example, "A"), and move the cur-
sor to anywhere in the File Name column.
(12) Press [Enter] to select file and close the file list window.
(13) Press [Esc] to close the select file.
Go to step 9 at the top of the next page.
procedure for transmitting a message (con't from page 4-5 )
9. Press [ ] to advance the cursor to the LES ID line.
10. Press [Enter] to open the selection window.
Transmit
0001|t 1. Transmit Message
2. Cancel
Priority
3. Request Delivery Status
Message File
Station Name
Destination Type
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
Subject
25 Char.
Attach File
[ Line
LES ID
Option
[ TRANSMIT ]
Figure 4-10 Transmit message menu, LES ID window opened
Note: If the LES ID entered is invalid, "Cannot use this LES.
Please check network configuration." appears.
11. Select LES ID.
12. Press [Enter] to close the selection window.
<[1] UNTITLED1>
Transmit Message
Normal
Message now being edited
E-Mail
Select File
[ Line 2/ 2 Col.
201 (SANTA PAULA)
ENTER: List DEL:
<[1] UNTITLED1>
Transmit Message
Normal
Message now being edited
E-mail
2/ 2 Col. 1 ]
Name LES ID
201 (SANTA PAULA)
SANTA PAULA 201
202
YAMAGUCHI 203
KUMSAN 208
SENTOSA 210
Size 24
1 ] [Insert ]
Size 24
[Insert ]
Remarks
USA
JAPAN
KOREA
SINGAPORE (NCS, ID244)
4-7