Appendix B:
Using the
Optional Auto
Take-Up Reel
Note: Epson
Doubleweight or
Singleweight Matte paper
should be wound forward.
If you want to print multiple images on roll paper and have the printouts
rolled up automatically, you can use the optional Auto Take-Up Reel
(Epson Stylus Pro 9890 only).
To install the Auto Take-Up Reel, follow the instructions in the manual that
came with it.
You can wind your printed media either forward (with the printed surface
outside), or backward (with the printed surface inside).
Winding forward
The table below describes the status of the Auto Take-Up Reel as indicated
by the
light.
Sensor
Sensor light status
On
Flashing rapidly
Flashing slowly
Flashing very slowly
Off
Sensor
light
199
Winding backward
Description
Ready to use.
Operating
Power-saving mode
The Auto Take-Up Reel has an error and stopped
working; check the installation and see page 187 for
additional solutions.
Turned off.
199