Choosing Cut Sheet Paper Options - Epson STYLUS 7890 User Manual

Normal
cut
Double
cut
Single
cut
Note: These settings
override settings made
through the control panel.
Printing With Epson Drivers for Windows
8. Choose one of the following
• Normal Cut
image.
extends the space between images and trims each print
• Double Cut
individually. This provides the cleanest edge for borderless printing.
allows images to be printed end-to-end and saves paper.
• Single Cut
With borderless printing, you may see a sliver of the previous or
next image if you print multiple images in one print job. You will
see a white margin between print jobs.
disables automatic cutting. Choose this setting if you want to
• Off
operate the cutter manually, use the optional Auto Take-Up Reel,
or print multiple print jobs without cutting. See page 68 for
instructions on operating the cutter manually.
9. Select these additional roll paper options, if necessary:
• Auto Rotate
the printable width of the roll. The document is automatically
rotated 90 degrees and printed crosswise. Be sure to click
and select the width of your roll paper.
Width
• Print Page Line
your pages.
10. When you're finished, click

Choosing Cut Sheet Paper Options

Follow the steps in this section to print on cut sheet paper and select settings
for borderless printing, if desired. (If you're printing on roll paper, see
page 116.)
1. On the Properties or Preferences window, make sure the
selected.
119
Auto Cut
allows margin space at the top and bottom of each
saves paper if your document length is shorter than
prints trim lines on the right and bottom edges of
.
OK
settings:
Main
| 119
Roll
tab is