Updating Your Printer Firmware; Checking The Current Firmware Version - Epson STYLUS 7890 User Manual

52 | Setting Up the Printer
Note: With Windows XP,
if you see a Found New
Hardware Wizard screen,
select No, not this time,
click Next, and click Next
again.
Tip: For best results, use
a USB connection when
you update the firmware
on your printer.
7. Read the license agreement and click
8. When you see a screen asking you to turn on the printer, press the
printer's P Power button. (Make sure the printer is connected; see
page 48.)
For network connection, click the
created for the printer, and click
If you didn't create a port for the printer, select
9. When you see the final installation screen, click
10. Register your printer with Epson, then remove the printer software
CD-ROM.
11. If you need to create a port, see the Network Guide.
Go to the next section to update the printer firmware, if necessary.

Updating Your Printer Firmware

To keep your printer features and functionality up to date, you should check
for a newer version of firmware on the Epson support site and update your
printer, if necessary.

Checking the Current Firmware Version

1. Press the r
Menu
2. Press the d button until
.
Menu
3. Press again and note the firmware version displayed. When done,
Menu
press the l button.
Accept
Manual
.
OK
button.
PRINTER STATUS
52
.
button, select the port you
.
FILE
.
Exit
is highlighted, then press