126
|
Printing With Epson Drivers for Windows
Note: You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
•
Color Density
when you turn off color management in your printer software).
•
Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
•
Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
•
Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
•
Paper Thickness
sharper image when printing on unusually thick or thin paper.
lets you fine-tune the setting for various paper
•
Platen Gap
thicknesses.
•
Roll Paper Back Tension
on roll paper. Change the value if you find wrinkles on your
printouts when
3. When you finish selecting Paper Configuration settings, click
126
lets you control the ink saturation level (for example,
lets you print with non-Epson
helps reduce banding. Choose a lower
lets you decrease the paper suction level when
helps reduce vertical banding and creates a
lets you adjust the tension when printing
is selected.
Auto
.
OK