Epson STYLUS 7890 User Manual page 174

174 | Solving Problems
Message
INK CARTRIDGE ERROR
REPLACE CARTRIDGE
INK CARTRIDGE ERROR
PLEASE INSTALL THE
CORRECT CARTRIDGES
INK COVER OPEN
CLOSE INK COVER
INK LOW
INK TOO LOW TO CLEAN
REPLACE INK CARTRIDGE
INK TOO LOW TO CLEAN
THE CARTRIDGE BEING
USED CAN BE INSTALLED
AGAIN FOR PRINTING
MAINTENANCE REQUEST
MAINTENANCE TANK
NEARLY FULL
MAINTENANCE TANK
ERROR
REPLACE THE
MAINTENANCE TANK
MAINTENANCE TANK FULL
REPLACE THE
MAINTENANCE TANK
NO CARTRIDGE
INSTALL INK CARTRIDGE
NO MAINTENANCE TANK
INSTALL THE
MAINTENANCE TANK
Explanation
Ink cartridge(s) may have a bad
contact or condensation.
You tried to install an ink
cartridge that cannot be used
with this printer.
The ink cover or covers are
open.
Ink cartridge(s) are nearly
expended (printing continues).
Not enough ink for head
cleaning.
Not enough ink for head
cleaning, but enough for
printing.
A printer part may need to be
replaced soon.
The maintenance tank is almost
full.
The maintenance tank may be
incorrectly installed.
The maintenance tank is full.
Ink cartridge(s) not installed, or
an incorrect cartridge is
installed.
Maintenance tank is not
installed.
174
Response
Remove and reinstall the ink cartridge; if the
error remains, replace the cartridge. See
page 153.
If you are replacing ink cartridges, check the
package and product code. Replace the ink
cartridge with a genuine Epson ink cartridge.
Close the cover(s).
Make sure you have replacement cartridges
available; see page 153. Print quality may
decline when ink is low.
Replace the cartridge(s) before cleaning; see
page 153.
Replace the cartridge(s) before cleaning; see
page 153. After cleaning is finished, you can
re-use the low ink cartridge.
Note the code number and contact Epson as
described on page 13.
Make sure you have a replacement
maintenance tank. For the Pro 9890, note
which tank is nearly full; see page 163.
Reinstall the maintenance tank. If the error
remains, replace the maintenance tank. For
the Pro 9890, note which tank needs
replacement; see page 163.
Replace the maintenance tank. For the
Pro 9890, note which tank is full; see
page 163.
Install ink cartridge(s); see page 153. Do not
reinstall the incorrect cartridge.
Make sure the maintenance tank is fully
inserted. For the Pro 9890, note which tank
is missing; see page 163.