Auto Take-Up Reel Error Messages - Epson STYLUS 7890 User Manual

176 | Solving Problems
Message
PAPER SETTING ERROR
CHECK THE PAPER SOURCE
IN THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
PAPER SIZE ERROR
LOAD CORRECT PAPER SIZE
PAPER SKEW
LOAD PAPER PROPERLY
PRINTER ERROR
RESTART THE PRINTER
Message
TAKE-UP DISCONNECTED
SET AUTO TAKE-UP REEL
SYSTEM IN PRINTER AND
RESTART THE PRINTER
TAKE-UP DISCONNECTED
DO YOU CONTINUE?
TAKE-UP ERROR
CHECK THE STATUS OF
AUTO TAKE-UP REEL UNIT
AND RESTART THE
PRINTER
TAKE-UP ERROR
IS ANYTHING
OBSTRUCTING THE
TAKE-UP REEL SENSOR
SYSTEM?
Explanation
The paper source selected in
the printer driver and the
control panel do not match.
The loaded paper size does not
match the size of the image.
Paper is not loaded straight.
You tried to print while an error
condition was present.

Auto Take-Up Reel Error Messages

If you have the optional Automatic Take-Up Reel System, check the
following list for error messages that might appear:
Explanation
The Auto Take-up Reel is not
installed correctly.
The Auto Take-up Reel is not
installed correctly.
Paper is not loaded on the reel
correctly.
The Auto Take-up Reel is not
winding paper.
176
Response
Check the Paper Source settings and make
sure the paper is loaded correctly.
Make sure the paper size matches the size
of the image.
Press the button and make sure the
paper is loaded straight.
Press the P Power button to turn off the
printer, then turn it back on.
Response
Turn the printer off, then install the Auto
Take-up Reel correctly. See page 199.
Select YES to continue printing without
using the Auto Take Up Reel. Or, select NO,
turn the printer off, then connect the Auto
Take-up Reel (see page 199) and restart the
printer.
Press the button and load the paper
correctly; see page 200.
Make sure nothing is obstructing the
sensor. Press the button and load the
paper correctly; see page 200.