Epson STYLUS 7890 User Manual page 175

Message
NOT ENOUGH EMPTY
SPACE
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
NOZZLE CHECK ERROR
PRESS THE BUTTON
NOZZLE CLOG DETECTED
NOT ENOUGH INK OR
SPACE IN MAINT TANK
PAPER CUT ERROR
REMOVE UNCUT PAPER
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
PAPER ERROR
LOAD PAPER CORRECTLY
PAPER JAM
REMOVE PAPER
PAPER LOW
PAPER OUT
LOAD PAPER
PAPER RELEASED
LOAD PAPER
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
Explanation
The maintenance tank is too
full for head cleaning.
Auto cleaning cannot be
performed.
Not enough ink or maintenance
tank capacity for head cleaning.
Roll paper was not cut
correctly.
The cutter may be blunt or
incorrectly installed.
Roll paper is used with the cut
sheet setting.
Paper is not loaded correctly.
Paper has jammed in the
printer.
The paper roll is almost
finished.
No paper is loaded.
The button has been
pressed with no paper loaded.
Paper ran out during printing.
The button has been
pressed.
The paper is not detected.
175
Solving Problems
Response
Replace the maintenance tank; see
page 163.
Press the button to clear the error, then try
cleaning again. If necessary, cancel cleaning
from the computer, then restart the printer.
Select YES, then follow the instructions to
replace the ink cartridge or maintenance
tank.
Press the button and open the front
cover. Remove the uncut paper.
Reinstall or replace the cutter if necessary;
see page 159.
Press the button and remove the paper.
Press the button, then reload paper
correctly.
Press the button and remove the
jammed paper; see page 185 for more
information.
Replace the roll.
Load paper.
Press the button, then load paper.
Press the button and remove the roll
paper core. Then load another roll.
Load paper, then press the
Press the button to clear the error,
then select the right paper.
| 175
button.