Ricoh Aficio MP C4500 Facsimile Reference Manual page 84

Transmission
You can send Internet Fax documents directly to their destinations without go-
ing through the SMTP server. Internet Faxes are normally transmitted via the
SMTP server. However, with this feature the domain part of the destination's e-
mail address is read as the SMTP server's address and transmissions bypass the
SMTP server. Since this reduces load on the server, you can send faxes without
1
having to take server to destination transfer time into account.
There are two ways of specifying a destination, as follows:
❖ Specify the other party's host name
Specify a destination's e-mail address by adding the other party's host name
to the domain part of the e-mail address. Specify the address to the right of @
as follows: "host name", ". (dot)", and "domain name".
xxxx@host name of the other party.domain name
Example: The other party's e-mail address is "abc@defcompany.com" and the
host name is "HOST"; abc@HOST.defcompany.com
❖ Specify the other party's IPv4 address
Specify a destination's e-mail address by changing the domain part of the e-
mail address to the other party's IPv4 address.
xxxx@[the other party's IPv4 address]
Example: The other party's e-mail address is "abc@defcompany.com" and the
IPv4 address is "192.168.1.10"; abc@[192.168.1.10]
Follow these steps to bypass the SMTP server.
A
Press [SMTP].
B
Press [No].
74