Changing The User Parameters - Ricoh Aficio MP C3500 EFI General Settings Manual

Facsimile Features

Changing the User Parameters

This section describes how to set parameters.
Important
❒ Access to some User Parameter Settings may require options, or other settings
may need to be made beforehand.
❒ It is recommended that you print and keep a User Parameter list when you
program or change a User Parameter.
❒ Do not change any bit switches other than those shown on the previous pages.
A
Press [Facsimile Features].
B
Press [Initial Settings].
4
C
Press [Parameter Setting].
D
Select the switch number you want to change.
E
Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat from step
F
Press [OK].
To cancel these settings, press [Cancel]. The display returns to that of step
G
Repeat step
H
After all the settings are finished, press [Exit].
I
Press the {User Tools/Counter} key.
160
E
to change another bit number for the same switch.
D E
through step to change the switch settings.
D
.